MAGENE Road Pedals P715S with Power Meter for SPD-SL

P715 - POWER METER PEDALS
YOUR PATH TO THE TOP OF CYCLING
Using the latest technology, the P715 takes your training to a whole new level. These pedals with a precise power meter will help you gain more strength, improve efficiency and achieve peak form.

±1%
Maximum power measurement accuracy

120 hours
Battery life that won't let you down

7
Advanced training features for faster progress

P715 K & P715 S
Perfectly optimized for KEO and SPD-SL cleats

No compromises:
• 100% compatibility with your bike
• Installation in less than 1 minute
• Bluetooth and ANT+ for seamless connectivity
Every watt counts – and we measure it exactly where it is generated.
Thanks to the integrated dual-sided power meters, the P715 sensor is placed directly where your legs generate power. This minimizes losses and errors in data transmission. The pedals measure the power of each leg separately – in real time, with maximum precision and without compromise.
__________________________________________
-Intelligent technology for maximum precision
-Integrated gyroscope
-Your pedaling style changes at every angle and moment. The gyroscope measures angular velocity in real time and accurately calculates power in every phase of the stroke – even during unstable riding.
-Temperature compensation
-Altitude differences and temperature changes will no longer affect your data. The P715's special algorithm automatically adapts to the environment to provide consistent and reliable measurements – from mountain passes to hot asphalt.
________________________________________
7 functions for advanced training and detailed analysis. The P715 gives you much more than just watts and cadence:
• Power phase – reveal your power generation zone, force angle and maximum load area. Optimize your performance where it really matters.
• Riding position – compare performance in different positions and adapt your technique to different situations.
• Left-right leg balance – compensate for your weaknesses and train more effectively.
• Torque efficiency – find out how efficiently you transfer power to the pedals.
• Pedaling smoothness – analyze the consistency of your power throughout the entire stroke cycle.
__________________________________________
Quick installation
With the P715, you can start training almost immediately. Assembly is the same as standard pedals – insert, tighten with a wrench (recommended torque 30–40 Nm) and you’re good to go.
________________________________________
Flexibility without compromise
• Two models: P715 K (KEO) or P715 S (SPD-SL) – choose according to your preferences.
• Compatible with all bikes with standard cranks – road, time trial, triathlon, with round or oval chainrings.
________________________________________
Light, strong and durable
The combination of carbon composite and precipitation-hardened stainless steel results in an incredible weight of just 157 g – without losing rigidity or durability.
________________________________________
Connection without borders
Support for both Bluetooth and ANT+ means you can connect to one device via Bluetooth and an unlimited number of devices via ANT+ at once.
Model: P715 S
Weight: 318 g
Cleat: SPD-SL
Accuracy of power measurement. ±1%
Q-factor: 55mm
Stack height: 13mm
Wireless protocol: Bluetooth, ANT+
Data functions: Power, cadence, left-right leg balance, torque efficiency, pedaling smoothness, power phase, riding position
Calibration: Automatic and manual
Waterproof: IPX7
Battery life: 120 hours
Charging method: Magnetic charging
Cadence range: 20-240 rpm
Power range: 0-2500 W
Operating temperature: -20 to 50°C
__________________________________________
Compatible cycling computers
Compatible with major cycling computers including Magene, Garmin, Wahoo, iGPSPORT, Bryton, XOSS, BLACK BIRD and more.
Power phase and riding position functions are only available on cycling computers that support these functions, such as GARMIN and MAGENE
Compatible software
Magene Utility
Package contents
• Power meter pedal ×2
• Crank mat ×2
• Charging cable ×1
• Quick start guide ×1

Safety notice
WARNING
· Before first use, please charge and activate the product - power meter pedals.
· Before installing the product, please read the quick start guide and safety instructions carefully.
· Strictly follow the installation instructions. Incorrect installation may cause safety accidents and injuries. It may also damage the product, making it unusable and not covered by the warranty.
· We recommend that a qualified technician perform the installation.
· Before starting use, make sure you know the correct way to put on and take off the pedals to prevent falls.
· Before riding, check that the pedal lock force meets the requirements. It is recommended to adjust it to a comfortable level before riding.
· It is forbidden to replace third-party pedals without permission, as this may damage the product, making it unusable and not covered by the warranty.
· Never tighten or install the pedals with a power meter while holding the power meter module in your hand - it may be damaged.
· Only use a USB adapter with an output voltage of 5V for charging. Excessive voltage may damage the product. Do not short-circuit or touch the charging head with metal objects when charging.
SAFETY INSTRUCTIONS
Things to watch out for:
1. Do not use a high-pressure water jet to clean the power meter when washing your bike.
2. The power meter module is designed to be splash-proof, do not immerse it in water.
3. Do not subject the power meter module to strong impacts - it may come loose or damage the force sensor.
4. Check the functionality of the pedals and locking plates before each ride. If the plate is too worn, this may lead to accidents.
5. Before riding, make sure that the distance between the shoe and the power meter module is at least 2 mm. If they touch the sole, upper or locking plate, do not use the product - this may damage the module and void the warranty.
6. Do not attempt to open or disassemble the pedal body or the power meter module - this may damage the sensor and void the warranty.
7. Use a neutral detergent when cleaning. Do not use alkaline agents or thinners - they may shorten the life of the module cover.
8. The power meter module uses 2.4 GHz wireless communication. Objects and the environment may cause signal interference. In this case, try testing the device in an open area. Electromagnetic waves and interference may lead to inaccurate measurements.
9. Natural wear and tear and performance deterioration due to age are not covered by the warranty.
10. Do not store or use the device in high temperature or humid environments for a long time (e.g. in a closed car exposed to the sun, near heating appliances or in a sauna).

Manufacturer Information
Manufacturer:
Qingdao Magene Intelligence Technology Co., Ltd.
Office address: No.126 Shuyu Road, Chengyang District, Qingdao, Shandong, China
officialwebsite@magene.com

EU Representative:
Success Courier Sl
Calle Rio Tormes Num. 1, Planta 1,
Derecha, Oficina 3, Fuenlabrada,
Madrid, 28947 Spain
email: successservice2@hotmail.com